Fluke 754 Documenting Process Calibrator With HART Communication

New / Used: Used

Functions & Ranges: DCV 0 to ±1020 V; ACV 1 mV to 1020 V, 10 Hz–500 kHz (extended-band sine to 2 MHz, typical); DCI 0 to 20.5 A; ACI 29 µA to 20.5 A, 10 Hz–30 kHz; Resistance 0 Ω–1.1 GΩ; Capacitance 220 pF–110 mF; dual outputs, phase control, 2nd–50th harmonics.

DC Voltage Accuracy (1-year, 20–30 °C): as low as ±(11 ppm of output + 2 µV) on 0–3.3 V range; noise 10 Hz–10 kHz rms down to 60 µV on 3.3 V range.

AC Voltage Accuracy: example 100 V, 45 Hz–1 kHz: ±(190 ppm of output + 2 mV) 1-year; extended-bandwidth sine 0.01–9.99 Hz / 500 kHz–2 MHz with stated flatness

New / Used: Used

DC Voltage Output: 0 V – ±1100 V; 10 V best-24 h accuracy ±1.7 ppm

AC Voltage Range & Bandwidth: 220 µV – 1100 V, 10 Hz – 1 MHz fundamental (to 30 MHz with Wideband Option 03)

DC / AC Current Output: 0 – ±2.2 A direct (extendable to 11 A via 5725A amplifier)

New / Used: Used

DC Voltage Output: 0 V – ±1100 V, 6 ppm ± 500 µV (1-year spec.)

AC Voltage Range / Bandwidth: 0.22 µV – 1100 V, 10 Hz – 1 MHz fundamental output

DC / AC Current Output: 0 – ±2.2 A direct (extendable to 11 A with 5725A amplifier)

New / Used: Used

DC Voltage Output: 0 V – ±1020 V, best 1-year accuracy ≈ 11 ppm of setting

AC Voltage Range & Bandwidth: 1 mV – 1020 V, 10 Hz – 500 kHz fundamental

DC / AC Current Output: 0 – ±20.5 A direct (extendable to 50 A with external 5220A/52120A amplifier)

New / Used: Used

Leveled-Sine Frequency Range: 0.1 Hz – 3.2 GHz with 9500C/320 active heads

Fast-Edge Rise Time: ≤ 150 ps (bandwidth verification)

Amplitude Range: 4.44 mV – 5.56 V p-p into 50 Ω (≤ 550 MHz); ≥ 25 mV p-p – 2 V p-p above 1 GHz