China Multi Function Calibrator

• 

  Fluke Multi Product Calibrator 5522A ±1020 V / 20.5 A 11 Ppm Best DCV Accuracy Multifunction Calibrator

  New / Used:Used

  Functions & Ranges:DCV 0 to ±1020 V; ACV 1 mV to 1020 V, 10 Hz–500 kHz (extended-band sine to 2 MHz, typical); DCI 0 to 20.5 A; ACI 29 µA to 20.5 A, 10 Hz–30 kHz; Resistance 0 Ω–1.1 GΩ; Capacitance 220 pF–110 mF; dual outputs, phase control, 2nd–50th harmonics.

  DC Voltage Accuracy (1-year, 20–30 °C):as low as ±(11 ppm of output + 2 µV) on 0–3.3 V range; noise 10 Hz–10 kHz rms down to 60 µV on 3.3 V range.

  Chat Now
• 

  High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function

  New / Used:Used

  Leveled-Sine Frequency Range:0.1 Hz – 3.2 GHz with 9500C/320 active heads

  Fast-Edge Rise Time:≤ 150 ps (bandwidth verification)

  Chat Now
• 

  Low Phase Noise RF Reference Source Multi Function Calibrator 27 GHz Fluke 96270A

  New / Used:Used

  Frequency Range:1 mHz – 27 GHz (4 GHz via leveling head, full range via microwave output)

  Output Level Range:–130 dBm to +24 dBm (to 125 MHz); +20 dBm up to > 20 GHz

  Chat Now
• 

  3.2 GHz Fast Edge / Leveled Sine Fluke 9530 Active Head Used

  New / Used:Used

  Leveled-Sine Frequency Range:0.1 Hz – 3.2 GHz (when driven by a 9500B mainframe)

  Fast-Edge Rise Time:Selectable 150 ps or 500 ps pulses for bandwidth verification

  Chat Now
• 

  Fluke 9550 25 Ps Ultra Fast Edge Active Head For Oscilloscope Calibrator

  New / Used:Used

  Fast-Edge Rise/Fall Time:25 ps nominal (21 – 29 ps typical 10 %–90 %)

  Edge Amplitude Range:425 mV – 575 mV p-p into 50 Ω

  Chat Now
• 

  High Performance Oscilloscope Calibrator Multi Function Fluke 9500B 6 GHz

  New / Used:Used

  Leveled-Sine Frequency Range:0.1 Hz – 6 GHz with 9500B/600–B600 heads

  Fast-Edge Rise Time:≤ 70 ps for bandwidth verification (standard heads)

  Chat Now
• 

  Four Phase Electrical Power Standard Multifunction Calibrator Calibration 1025 V / 21 A Fluke 6105A

  New / Used:Used

  Voltage Output Range:0 V – 1025 V rms (per phase, sine or distorted)

  Current Output Range:0 A – 21 A rms direct (expandable to 120 A with 6106A current amplifier)

  Chat Now
• 

  Used ±1020 V / 20.5 A Multi Product Calibrator 50 Ppm DC Accuracy Fluke 5502A

  New / Used:Used

  Functions & Ranges:DCV 0 to ±1020 V; ACV 1 mV to 1020 V, 10 Hz–500 kHz; DCI 0 to 20.5 A; ACI 29 µA to 20.5 A (10 Hz–30 kHz); Resistance 0 to 1100 MΩ; Capacitance 220 pF to 110 mF; TC (B, C, E, J, K, L, N, R, S, T, U) and RTD simulation/measure; dual-output voltage/current an

  DC Voltage Accuracy:Best 1-year ±0.005% + 5 µV (0–3.3 V); up to ±0.0055% + 1.5 mV at 1020 V. Noise (10 Hz–10 kHz): ≤20 mV at 1020 V.

  Chat Now
• 

  Fluke 5101B 1100 V / 2 A Multifunction Calibrator With 0.005% DC Accuracy

  New / Used:Used

  Functions / Ranges:DC/AC Voltage to 1100 V, DC/AC Current to 2 A, Resistance 1 Ω–10 MΩ (4-wire below 2–1100 V). With Model 5220A, current extends to 20 A.

  DC Voltage Accuracy (6 months, 20–30 °C):±(0.005% of setting + 0.001% of range + 5 µV); ripple/noise ≤0.05% of setting rms.

  Chat Now
• 

  Fluke 6100A 1000 V / 20 A Electrical Power Quality Calibrator Multi Function

  New / Used:Used

  Voltage Output Range:0 – 1000 V RMS, sine or distorted, 6-digit resolution

  Current Output Range:0 – 20 A RMS (direct), 14 V compliance

  Chat Now
• 

  600 MHz 2.1 GHz Opt Oscilloscope Calibrator Fluke 5820A Used Multifunction Calibrator

  New / Used:Used

  Oscilloscope Bandwidth Coverage:Leveled-sine output 25 MHz – 600 MHz, extendable to 2.1 GHz with the GHz option

  Fast-Edge Rise Time:≤ 1 ns standard; ≤ 150 ps with GHz “Fast Edge” option

  Chat Now
• 

  5560A High Performance Fluke Multi Product Calibrator 1020 V / 30 A

  New / Used:Used

  Direct Voltage Output:0 V – ±1020 V (DC)

  Direct Current Output:0 – ±30.2 A (DC)

  Chat Now