Chat Now |
Home ProductsMulti Function Calibrator

High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function

All Products

RF Spectrum Analyzer

(94)

Signal Spectrum Analyzer

(24)

Vector Network Analyzer (VNA)

(67)

RF Communications Test Set

(13)

Optical Spectrum Analyzer

(16)

Multi Function Calibrator

(19)

RF Signal Generator

(39)

EMC Test Equipment

(6)

RF Power Meter

(20)

RF Power Sensor

(18)

AC DC Variable Power Supply

(26)
I'm Online Chat Now

High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function

High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function
High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function

Large Image :  High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function

Product Details:
Brand Name: Fluke
Model Number: 9500C
Payment & Shipping Terms:
Minimum Order Quantity: 1
Delivery Time: 3-5 days
Payment Terms: L/C,D/A,D/P,T/T,Western Union,Western Union,T/T,MoneyGram
Contact Now Chat Now

High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function

Description
New / Used: Used Leveled-Sine Frequency Range: 0.1 Hz – 3.2 GHz With 9500C/320 Active Heads
Fast-Edge Rise Time: ≤ 150 Ps (bandwidth Verification) Amplitude Range: 4.44 MV – 5.56 V P-p Into 50 Ω (≤ 550 MHz); ≥ 25 MV P-p – 2 V P-p Above 1 GHz
Output Channels: Up To 5 Simultaneous Active Heads For Multi-trace Scope Remote Interfaces & Automation: GPIB / RS-232 Control With Built-in MET/CAL® Procedures
Highlight:

9500c fluke oscilloscope calibrator

,

fluke oscilloscope calibrator 3.2 ghz

,

9500c fluke multifunction calibrator

Fluke 9500C — 3.2 GHz High-Performance Oscilloscope Calibrator Multi Function Calibrator

 

The pre-owned Fluke 9500C merges leveled-sine, fast-edge, DC and timing-marker outputs in a single chassis, delivering fully automated bandwidth, gain and time-base calibration for oscilloscopes up to 3.2 GHz. Five switch-selectable heads feed identical signals to every channel, eliminating recabling and minimising operator error, while ≤ 150 ps edges and millivolt-level amplitudes expose front-end slew-rate and noise issues. Built-in MET/CAL® routines, GPIB/RS-232 control and on-board diagnostics shorten test cycles and generate audit-ready reports. Supplied fully tested, freshly calibrated and firmware-current, each unit ships from stock—providing metrology-grade precision and long-term Fluke serviceability at a fraction of new-instrument cost.

 

High Performance 9500C Fluke Oscilloscope Calibrator 3.2 GHz Multi Function 0

 

 

 

Contact Us for a Fast Quote

 

Interested in Fluke 9500C or a similar model?

 

  • Drop your WhatsApp number or e-mail on our website and we will:

     

    • Send a tailored quotation and any current promotions.

    • Provide extra photos, test data, and full configuration details.

    • Discuss shipping, duties, warranty, and any other specifics you need.

     

Looking for other models? Our inventory changes daily—ask for the latest list of spectrum analyzers and RF equipment.

 

 

 

 

Frequently Asked Questions (FAQ)

 

1/ Performance Assurance

Every unit is calibrated at an ISO/IEC 17025 accredited laboratory. The original calibration certificate, marked TESTRO Certified, is linked to the unit’s serial number and included in the shipment.

 

 

2/ Integrity of Internal Components

  • A set of high-resolution teardown photographs showing seals, fasteners, and all critical modules.

  • A live video session in which an engineer demonstrates gain-linearity, noise-floor, and spurious-response tests in real time.

    All recordings remain in our cloud archive for the life of the product.

 

3/ Warranty & Technical Support

  • One-year transferable warranty.
  • Our in-house engineering team is available on business days to provide remote software troubleshooting or hardware-assembly guidance.

 

4/ International Shipping Protection

  • Custom flight case built from aviation-grade plywood with triple-layer anti-vibration foam.
  • Shock- and tilt-indicator labels on every crate.
  • Preferred carrier: DHL, delivery in 3–5 days to major destinations.

 

5/ Payment Terms

We accept T/T, wire transfer, credit card.

 

6/ On-Site Inspection

Customers are welcome to visit our Shenzhen warehouse and refurbishment line to inspect calibration benches, burn-in racks, and inventory. 

Tag:

multifunction process calibrator,

used multifunction calibrator,

fluke multifunction calibrator

Contact Details
TESTRO ELECTRONICS LLC

Contact Person: Ben

Send your inquiry directly to us (0 / 3000)

Other Products
Fluke Multi Product Calibrator 5522A ±1020 V / 20.5 A 11 Ppm Best DCV Accuracy Multifunction Calibrator

Fluke Multi Product Calibrator 5522A ±1020 V / 20.5 A 11 Ppm Best DCV Accuracy Multifunction Calibrator

New / Used: Used

Functions & Ranges: DCV 0 to ±1020 V; ACV 1 mV to 1020 V, 10 Hz–500 kHz (extended-band sine to 2 MHz, typical); DCI 0 to 20.5 A; ACI 29 µA to 20.5 A, 10 Hz–30 kHz; Resistance 0 Ω–1.1 GΩ; Capacitance 220 pF–110 mF; dual outputs, phase control, 2nd–50th harmonics.

DC Voltage Accuracy (1-year, 20–30 °C): as low as ±(11 ppm of output + 2 µV) on 0–3.3 V range; noise 10 Hz–10 kHz rms down to 60 µV on 3.3 V range.

AC Voltage Accuracy: example 100 V, 45 Hz–1 kHz: ±(190 ppm of output + 2 mV) 1-year; extended-bandwidth sine 0.01–9.99 Hz / 500 kHz–2 MHz with stated flatness
1100 V / 2.2 A Ultra High Accuracy Multi Function Calibrator Fluke 5730A

1100 V / 2.2 A Ultra High Accuracy Multi Function Calibrator Fluke 5730A

New / Used: Used

DC Voltage Output: 0 V – ±1100 V; 10 V best-24 h accuracy ±1.7 ppm

AC Voltage Range & Bandwidth: 220 µV – 1100 V, 10 Hz – 1 MHz fundamental (to 30 MHz with Wideband Option 03)

DC / AC Current Output: 0 – ±2.2 A direct (extendable to 11 A via 5725A amplifier)
High Accuracy Multifunction Calibrator Fluke 5700A 1100 V / 2.2 A

High Accuracy Multifunction Calibrator Fluke 5700A 1100 V / 2.2 A

New / Used: Used

DC Voltage Output: 0 V – ±1100 V, 6 ppm ± 500 µV (1-year spec.)

AC Voltage Range / Bandwidth: 0.22 µV – 1100 V, 10 Hz – 1 MHz fundamental output

DC / AC Current Output: 0 – ±2.2 A direct (extendable to 11 A with 5725A amplifier)
1020 V / 20 A Multi Product Calibrator Fluke Calibrator 5520a

1020 V / 20 A Multi Product Calibrator Fluke Calibrator 5520a

New / Used: Used

DC Voltage Output: 0 V – ±1020 V, best 1-year accuracy ≈ 11 ppm of setting

AC Voltage Range & Bandwidth: 1 mV – 1020 V, 10 Hz – 500 kHz fundamental

DC / AC Current Output: 0 – ±20.5 A direct (extendable to 50 A with external 5220A/52120A amplifier)
Low Phase Noise RF Reference Source Multi Function Calibrator 27 GHz Fluke 96270A

Low Phase Noise RF Reference Source Multi Function Calibrator 27 GHz Fluke 96270A

New / Used: Used

Frequency Range: 1 mHz – 27 GHz (4 GHz via leveling head, full range via microwave output)

Output Level Range: –130 dBm to +24 dBm (to 125 MHz); +20 dBm up to > 20 GHz

Level Accuracy (50 Ω leveling head): ±0.03 dB to 100 kHz; ±0.05 dB to 128 MHz; ±0.3 dB at 4 GHz
About

RF Spectrum Analyzer

Anritsu MS2663C 8.1 GHz Portable RF Spectrum Analyzer Used

FSL3 3 Ghz Spectrum Analyzer Lightweight Used Rohde & Schwarz

20 GHz Handheld RF Spectrum Analyzer Agilent Keysight N9344C

Signal Spectrum Analyzer

8 GHz Ultra Low Noise Signal Spectrum Analyzer Rohde & Schwarz FSW8

Rohde & Schwarz FSVR30 Real Time Signal Analyzer 30GHz

Keysight N9041B UXA Signal Spectrum Analyzer 110 GHz Ultra Wideband Signal Analyzer

LEAVE MESSAGE

Privacy Policy | China Good Quality RF Spectrum Analyzer Supplier. © 2025 TESTRO ELECTRONICS LLC. All Rights Reserved.