Product Details:
Contact Now
Chat Now
|
New / Used: | Used | Frequency Range: | 3 Hz – 26.5 GHz |
---|---|---|---|
Analysis Bandwidth: | 80 MHz With Option 122 (40 MHz With Opt 140; 10 MHz Standard) | Phase Noise: | –118 DBc/Hz @ 10 KHz Offset (1 GHz Carrier, Typical) |
DANL (Preamp On): | –155 DBm/Hz Typical @ 1 GHz, Preamp Off | Size / Weight: | 426 × 177 × 483 Mm, ≈ 23 Kg Net |
Highlight: | PSA RF Spectrum Analyzer,26.5 GHz Spectrum Analyzer,80 MHz Bandwidth Spectrum Analyzer |
Attribute | Value |
---|---|
New / Used | Used |
Frequency Range | 3 Hz – 26.5 GHz |
Analysis Bandwidth | 80 MHz with Option 122 (40 MHz with Opt 140; 10 MHz standard) |
Phase Noise | –118 dBc/Hz @ 10 kHz offset (1 GHz carrier, typical) |
DANL (Preamp On) | –155 dBm/Hz typical @ 1 GHz, preamp off |
Size / Weight | 426 × 177 × 483 mm, ≈ 23 kg net |
The pre-owned Agilent E4440A PSA combines laboratory-grade dynamic range with 3 Hz-to-26.5 GHz coverage and up to 80 MHz instantaneous bandwidth, enabling engineers to capture wide 5G NR, radar or satellite communication bursts in a single sweep.
A -118 dBc/Hz phase-noise floor and -155 dBm/Hz noise level reveal low-level spurs without external LNAs, while 0.19 dB amplitude accuracy and SCPI/LAN automation ensure precise and repeatable compliance tests.
Purchasing refurbished significantly reduces capital expense and lead time. Units can be shipped ISO-17025-calibrated with the latest PSA firmware, maintaining Agilent reliability, option upgradeability and long-term serviceability at a fraction of new-instrument cost.
Interested in an Agilent E4440A — 26.5 GHz 80 MHz-Bandwidth PSA RF Spectrum Analyzer or a similar model?
Looking for other models? Our inventory changes daily—ask for the latest list of spectrum analyzers and RF equipment.
Every unit is calibrated at an ISO/IEC 17025 accredited laboratory. The original calibration certificate, marked TESTRO Certified, is linked to the unit's serial number and included in the shipment.
All recordings remain in our cloud archive for the life of the product.
We accept T/T, wire transfer, credit card.
Customers are welcome to visit our Shenzhen warehouse and refurbishment line to inspect calibration benches, burn-in racks, and inventory.
Contact Person: Ben